NIKO - Cut-Off Holder (Integral Shank Tool Holders)

Designation	Metric					Inches
------	W	D Max.	L	B	H=H1	W	D Max.	L	B	H=H1	Insert Style
NTHR/L 10-2	2.2/2.4	36	110	10	10	.087/.093	1 13/32	4 21/64	3/8	3/8	NTGTN/R/L-2,2.4 NTGTN/R/L-2,2.4 NTGTN/R/L-3 NTGTN/R/L-3 NTGTN/R/L4 NTGTN/R/L-3 NTGTN/R/L-4
NTHR/L 12-2	2.2/2.4	36	110	12	12	.087/.093	1 13/32	4 21/64	1/2	1/2
NTHR/L 16-3	3.1	40	110	12	16	0.120	1 9/16	4 59/64	1/2	5/8
NTHR/L 20-3	3.1	40	125	20	20	0.120	1 9/16	4 59/64	3/4	3/4
NTHR/L 20-4	4.1	40	125	20	20	0.160	1 9/16	4 59/64	3/4	3/4
NTHR/L 25-3	3.1	40	150	25	25	0.120	1 9/16	5 29/32	1.0	1.0
NTHR/L 25-4	4.1	40	150	25	25	0.160	1 9/16	5 29/32	1.0	1.0

Starter Kit

16-5 Starter Kit

1 - NTBN 16-5 (5/8") Blocks
1 - NTIH -26-3 PS Blades
10 - NTGTN-3-C5PV Inserts
1 - Extractor Wrench
1 - Allen Wrench

20-6 Starter Kit

1- NTBN -20-6 (3/4") Blocks
1 - NTIH -32-3-PS Blades
10 - NTGTN-3-C5PV Inserts
1 - Extractor Wrench
1 - Allen Wrench

25-6 Starter Kit

1- NTBN -20-6 (1") Blocks
1 - NTIH -32-3-PS Blades
10 - NTGTN-3-C5PV Inserts
1 - Extractor Wrench
1 - Allen Wrench