NIKO - Preset Gage
  • Designed of one-piece construction which gives strength and accuracy.
  • Made of high quality tool steel hardened to 60 RC
  • Precision ground on all surfaces
  • Four high visible lights
  • Easily replace lamp and battery.
  • Repeatability T.I.R within .0002" - 0.0006 mm

Inspect gage before use by making contact between body and top of gage using paper clip or metal coin.

  • Place electronic "Height Preset Gage" on table under machine spindle.
  • Make contact between tool in machine spindle and top gage. When contact is made the lamp will illuminate.

Designation
Metric
Inches
 
A
B
C
A
B
C
Preset Gage
25.4
50 ± 0.006
7.9
1.000
2.000 ± .0002
.310
 
Contact Nikcole Mini-Systems and Niko Minitools Nikcole Minisystmes Niko Minitools Case Study Request Mini-System or Minitool Catalog About Nikcole Mini-systems and Niko Minitools