NIKCOLE Mini-Systems™ - Internal Tool Holders

Right Handed Inserts Can Only be used with Left Hand Internal Tool Holders
Left Handed Inserts can only be used with Right Hand Internal Tool Holders

Holders are used with the folowing STANDARD MIN-SYSTEMS insert styles:
GIE-7-GP	(Grooving and Cutoff)
GIE-7-GR	(Grooving Full Radius)
GIE-7-SG	(Standard Grooving)
GIE-7-GW	(Threading)
GIE-7-SC	(Tracing)
GIE-7-ST	(Turning)

TORX SCREW - (M3 x 8.0) TORX KEY - (T-8)

Holder Designation	d +.003 -.003	h	L	L1	L2	F	D=Min
THI-7-3/4 L-R	.750		5.50	1.00	2.00
THI-7-1.00 L-R	1.000	.750	6.00	1.25	2.50	.525	1.50
THI-7-1 1/4 L-R	1.250		6.00	1.25	2.50
THI-7-20 L-R	20mm		140mm	25mm	50mm
THI-7-25 L-R	25mm	19.05mm	150mm	32mm	63mm	13.34mm	38.10mm
THI-7-32 L-R	32mm		150mm	32mm	63mm

Mini-System External Tool Holders

Holder for Swisss Automatics

Designation	A		L
	mm	inch	mm	inch
THE-7-0808 R-L	8 mm SQ		100mm
THE-7-3/8 R-L		.375 SQ		4.50
THE-7-1010 R-L	10mm SQ		120mm
THE-7-1/2 R-L		.500 SQ		4.50
THE-7-1212 R-L	12mm SQ		120mm
THE-7-5/8 R-L		.625 SQ		5.00
THE-7-1919-R-L	16mm SQ		125mm
THE-7-1.0 R		1.0 SQ		5.00

Designation	A	L
THS-7-0808 R-L	8mm SQ	140mm
THS-7-1010 R-L	10mm SQ	150mm

TORX SCREW - (M3 x 8.0) TORX KEY - (T-8)